Sale!

Mineral Veil Talc Free Setting Powder

$31.00

Product Highlights

A weightless, long-lasting dewy setting spray that hydrates skin and locks your makeup in place all day with a flawless, glowing finish.

Category Setting Spray & Powder

Description

What it is:

A weightless mineral setting powder that extends makeup wear while bluring and minimizing the appearance of fine lines and pores with no flashback.

What it does:

In a range of shades and finishes, Mineral Veil® Setting Powder is our cult favorite setting powder, versatile enough for all skintones and skin types. The light-as-a-feather, super smooth formulas blend onto skin without smudging the makeup you’re already wearing. Sheer and never cakey, Mineral Veil® Setting Powder weightlessly blurs and minimizes the appearance of fine lines and pores, whether it is applied over makeup or onto beautifully bare skin.

What it is formulated WITHOUT:

– Parabens

– Sulfates

– Phthalates

What else you need to know:

Original Mineral Veil® Finishing Powder gives skin a translucent, soft finish. Make the most of your makeup with Mineral Veil, a see-through but spectacular finale for any kind of complexion. It minimizes the look of fine lines, absorbing oils, and softens your complexion for an airbrushed finish.

Tinted Mineral Veil Finishing Powder delivers a warm tint finish. All the soft translucence of the original Mineral Veil finishing powder with a touch of warm tint. The finishing powder infuses your skin with softness and light while gently absorbing oil and minimizing the appearance of lines and pores. It goes on completely sheer and is versatile enough for all skintones.

Illuminating Mineral Veil Finishing Powder gives your skin a blurring, brightening finish. Completely sheer and versatile enough for all skintones, this complexion illuminator provides a soft glow and keeps skin looking photo-ready. Light-reflecting pearls impart a radiant, ethereal softness.

Hydrating Mineral Veil Finishing Powder leaves a cooling, brightening finish. This hydrating finishing powder brightens skin with a sheer, peachy-soft luminosity. The unique water and rice lipid encapsulated formula delivers an immediate brightening boost with a cool feeling. Clinically proven to improve skin’s ability to retain moisture, it also minimizes the appearance of fine lines, pores, and shine, and keeps your complexion looking fresh.*

Additional information

Ingredients	Zea Mays (Corn Starch), Corn Starch Modified, Zinc Stearate, Magnesium Stearate. May Contain: Mica, Titanium Dioxide (CI 77891), Iron Oxides (CI 77491, CI 77492, CI 77499). Clean at Sephora products are formulated without the following banned or restricted ingredients (please see Clean at Sephora landing page for full list of specific restrictions and allowances by category – this is not an exhaustive list): Acrylates, Aluminum Salts, Animal Musks/Fats/Oils, Benzophenones and related compounds, Butoxyethanol, Butylated hydroxyanisole (BHA), Butylated hydroxytulolene (BHT) under 0.1% , Carbon Black or Black 2, Coal Tar, Ethanolamines, Formaldehyde and Formaldehyde Releasing Agents, Hydroquinone, Lead and Lead Acetate, Mercury + Mercury Compounds (Thimerisol), Methoxyethanol, Methyl Cellosolve, Methylchloroisothiazolinone and Methylisothiazolinone, Mineral Oil, Nanomaterials (restrictions for specific nanomaterials only), Oxybenzone, Parabens, Petrolatum and Parrafin (USP grade only), Phenoxyethanol under 1%, Phthalates, Plastic Microbeads, Polyacrylamide & Acrylamide, Resorcinol, Retinyl Palmitate, Styrene, Sulfates, Talc (no detection of asbestos) , Toluene, Triclosan and Triclocarban, Undisclosed Synthetic Fragrance (under 1% and formulated without Acetaldehyde, Acetone, Acetonitrile, Benzalkonium chloride, BPA, EDTA, Methylene chloride, PTFE, PFOA), 1, 4, Dioxane (ingredients must comply with impurity thresholds), Octinoxate, PFAS compounds, Nitromusks and Polycyclic Musks, Ethoxylated Ingredients (including PEGS or polyethylene glycol must meet contamination limits for 1’4 Dioxane and ethylene oxide), Cyclic Silicones, EDTA and derivatives (allowed if no technical substitute under 0.2%)
How to use	Suggested Usage: Swirl, Tap, Buff® application: Swirl a small amount of Mineral Veil® Setting Powder in the lid until it all disappears into the brush. -Tap away excess. -Buff onto the skin in a circular motion. -Apply a quick sweep across the t-zone, around the cheeks or all over the face—wherever you need Mineral Veil® to gently lock makeup in place, absorb excess oil, and help keep you looking fresh.

Ingredients

Zea Mays (Corn Starch), Corn Starch Modified, Zinc Stearate, Magnesium Stearate. May Contain: Mica, Titanium Dioxide (CI 77891), Iron Oxides (CI 77491, CI 77492, CI 77499).

Clean at Sephora products are formulated without the following banned or restricted ingredients (please see Clean at Sephora landing page for full list of specific restrictions and allowances by category – this is not an exhaustive list):
Acrylates, Aluminum Salts, Animal Musks/Fats/Oils, Benzophenones and related compounds, Butoxyethanol, Butylated hydroxyanisole (BHA), Butylated hydroxytulolene (BHT) under 0.1% , Carbon Black or Black 2, Coal Tar, Ethanolamines, Formaldehyde and Formaldehyde Releasing Agents, Hydroquinone, Lead and Lead Acetate, Mercury + Mercury Compounds (Thimerisol), Methoxyethanol, Methyl Cellosolve, Methylchloroisothiazolinone and Methylisothiazolinone, Mineral Oil, Nanomaterials (restrictions for specific nanomaterials only), Oxybenzone, Parabens, Petrolatum and Parrafin (USP grade only), Phenoxyethanol under 1%, Phthalates, Plastic Microbeads, Polyacrylamide & Acrylamide, Resorcinol, Retinyl Palmitate, Styrene, Sulfates, Talc (no detection of asbestos) , Toluene, Triclosan and Triclocarban, Undisclosed Synthetic Fragrance (under 1% and formulated without Acetaldehyde, Acetone, Acetonitrile, Benzalkonium chloride, BPA, EDTA, Methylene chloride, PTFE, PFOA), 1, 4, Dioxane (ingredients must comply with impurity thresholds), Octinoxate, PFAS compounds, Nitromusks and Polycyclic Musks, Ethoxylated Ingredients (including PEGS or polyethylene glycol must meet contamination limits for 1’4 Dioxane and ethylene oxide), Cyclic Silicones, EDTA and derivatives (allowed if no technical substitute under 0.2%)

How to use

Suggested Usage:
Swirl, Tap, Buff® application:
Swirl a small amount of Mineral Veil® Setting Powder in the lid until it all disappears into the brush.
-Tap away excess.
-Buff onto the skin in a circular motion.
-Apply a quick sweep across the t-zone, around the cheeks or all over the face—wherever you need Mineral Veil® to gently lock makeup in place, absorb excess oil, and help keep you looking fresh.

Reviews

There are no reviews yet.

Be the first to review “Mineral Veil Talc Free Setting Powder”

Bath & Shower

Body Mist & Hair Mist

Body Moisturizers

Deodorant & Antiperspirant

Foot Care

Cleaning Supplies

Garden Chemicals

Candles & Home Scents

Women

Candles

Women

Cheek & Face

Eye

Lips

Nails

Eye Care

Face Wash & Facial Cleansers

Masks

Moisturizers

Beauty Tools

Brushes & Applicators

Hair Removal

Hurry up! Offers end in: